Share this post on:

The University of Helsinki.Polymers 2021, 13,9 ofData Availability Statement: Information readily available on request. Conflicts of Interest: The authors declare no conflict of curiosity.
polymersArticleComparative Examination of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Based Thermosetting Polymer Composites for Human Prosthetic Applications Employing Taguchi DesignJeetendra Mohan Khare one , Sanjeev Dahiya one , Brijesh Gangil 2 , Lalit Ranakoti three , Shubham Sharma 4, , Muhammad Roslim Muhammad Huzaifah 5, , Rushdan Ahmad Ilyas six,seven , Shashi Prakash Dwivedi eight , Somnath Chattopadhyaya 9 , Huseyin Cagan Kilinc ten and Changhe LiCitation: Khare, J.M.; Dahiya, S.; Gangil, B.; Ranakoti, L.; Sharma, S.; Huzaifah, M.R.M.; Ilyas, R.A.; Dwivedi, S.P.; Chattopadhyaya, S.; Kilinc, H.C.; et al. Comparative Evaluation of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Primarily based Thermosetting Polymer Composites for Human Prosthetic Applications Applying Taguchi Layout. Polymers 2021, 13, 3607. https:// doi.org/10.3390/polym13203607 Academic Editors: Emin Bayraktar, S. M. Sapuan and R. A. Ilyas Received: 25 September 2021 Accepted: 15 October 2021 Published: 19 October10 7 8 9School of Engineering Technological innovation, University of Technologies, Rajasthan, Jaipur 303903, India; [email protected] (J.M.K.); [email protected] (S.D.) Department of Mechanical Engineering, H.N.B. Garhwal University, Garhwal, Srinagar 246174, India; [email protected] Department of Mechanical Engineering, National Institute of Engineering (NIT Uttarakhand), Srinagar 246174, India; [email protected] Division of Mechanical Engineering, IK Gujral Punjab Technical University, Principal Campus, Kapurthala 144603, India Department of Crop Science, Faculty of Agricultural Science and Forestry, Universiti Putra Malaysia Bintulu Campus, Bintulu 97000, Malaysia School of Chemical and Vitality Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor Bahru 81310, Malaysia; [email protected] Centre for Innovative Composite Supplies, Universiti Teknologi Malaysia, Johor Bahru 81310, Malaysia G.L. Bajaj Institute of Technologies Management, Better Noida 201310, India; [email protected] Department of Mechanical Engineering, Indian Institute of Technologies (ISM) Dhanbad, Dhanbad 826004, India; [email protected] Civil Engineering Division, Istanbul Esenyurt University, Istanbul 34510, Turkey; [email protected] School of Mechanical and Automotive Engineering, Qingdao University of Technological innovation, Qingdao 266520, China; [email protected] Correspondence: [email protected] or [email protected] (S.S.); [email protected] (M.R.M.H.)Publisher’s Note: MDPI stays neutral with regard to Goralatide custom synthesis jurisdictional claims in published maps and institutional affiliations.Copyright: 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access short article distributed beneath the terms and disorders on the Innovative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ four.0/).Abstract: In polymer composites, JNJ-42253432 Autophagy synthetic fibers are primarily used as a chief reinforcing material, by using a broad variety of applications, and are therefore essential to research. In the present perform, we carried out the erosive wear of purely natural and synthetic fiber-based polymer composites. Glass fiber with jute and Grewia optiva fiber was reinforced in three unique polymer resins: epoxy, vinyl ester and polyester. The.

Share this post on:

Author: Gardos- Channel